Warp
Fill
(in-lb/3 in)
(in-lb/3 in)
NA
NA
22
42
20
38
20
44
Warp
Fill
(psi)
(psi)
34,700
34,100
37,700
38,400
41,000
40,000
43,000
44,000
BSS 7326
Method 1
Method 2
9
11.6
14
17.4
16
23.8
23
29.5
| Product Identification |
Specification |
||||
|
Conolite® 6100T Series laminates represent the most advanced selection of fiberglass reinforced phenolic cargo liner. Conolite® 6100T exhibit the low smoke and toxicity inherent in phenolic resins. The modified phenolic resin combined with the careful selection of "S-2" woven fiberglass reinforcements, create the highest strength to weight ratio of any commercial cargo liner available today. |
Conolite®
Cargo Liners meet or exceed the following material specifications:
|
Technical
Information (nominal
values)
| PRODUCT DESIGNATION | |||||
| Property | 6100T.013 | 6100T.020 | 6100T.030 | 6100T.040 | |
| Thickness
|
(in.) | 0.011 | 0.017 | 0.025 | 0.034 |
| Weight | (lb/ft2) | 0.10 | 0.16 | 0.23 | 0.32 |
| Drum Peel Warp Fill |
(in-lb/3 in) (in-lb/3 in) |
NA NA |
22 42 |
20 38 |
20 44 |
| Edge Bearing Warp Fill |
(psi) (psi) |
34,700 34,100 |
37,700 38,400 |
41,000 40,000 |
43,000 44,000 |
| Impact Strength BSS 7326 |
(ft lbs) Method 1 Method 2 |
9 11.6 |
14 17.4 |
16 23.8 |
23 29.5 |
| Flame Spread Index | 3 | 2.4 | 3.4 | 3.9 | |
| Smoke Density |
14 | 19 | 21 | 23 | |
| Flammability | Meets requirements of FAR 25, Appendix F, Part III. FAA 8110-3 available for all liners. | ||||